GM to CJ, Pair, Caliper Bracket

Caliper brackets to adapt your existing CJ disc brakes (with 2 bolt caliper bracket) to a GM knuckle. They are sold as a pair. These are typically used when swapping in a D44 front axle so you can reuse the existing CJ outers.  They work if you're just swapping the knuckles too. If you're running high steer arms, a little grinding will be required to clock the calipers correctly depending on the knuckles you use. Our instructions outline, in great detail, the process, so there's nothing to worry about as long as you have a grinder, some safety glasses, and couple of minutes of time.

Most applications require longer spindle studs to accommodate the 3/8" thick brackets. Type in PM63262 into the search field. Be sure to select the correct quantity/package size for your vehicle.

WARNING: This item will only work on Jeep CJs with existing factory disc brakes where the caliper bracket bolts to the knuckle with two bolts!!!  If the caliper bracket slides over the spindle (six bolts), there's no reason to buy these.  You can just reuse your exsiting brackets!